Thus, our brine fogging for steam bath can also be used as a tea inhalation technique for your steam bath or shower

You already have a steam shower or steam bath and do not want to miss the benefits of brine fogging? With this high-performance nebulizer, you can upgrade your steam bath into a “brine steam bath” or SOLEUM – one always reads about brine steam baths whereby the brine can of course not be transported with the steam but only “nebulized” or “atomized”.

Simply order our retrofit kit for SOLE nebulization here and do something good for your health!

However, if you have a Brine inhalation technology want to buy So they inform themselves well about the technology. There is the brine fogging with ultrasonic fogger (low fine mist, system like the fog bowl) or our brine fogging system via compressed air (very intensive! In about 20 minutes, a whole liter is nebulized!! and you can no longer see into the steam bath!!!).

Our NO MICE system is so intensive that it IS NOT SUITABLE for infrared cabins and saunas (we do not guarantee this). HOWEVER, for steam baths and steam showers, our brine inhalation technology is perfectly suitable.

Brine Nebulization Technology buy: Brief description

The special feature is the generation of brine fog (or tea fog). As an alternative, medicinal teas from the pharmacy can also be nebulized, upgrading the product novelty to a very private inhalation cabin.
The misted brine is not only good for breathing. Salt on the skin increases sweating and purification. The skin is actually cleaned deep into the pores, cared for and the precipitated salt has an extremely positive effect on problematic skin.
At the same time it forms a natural protection and supports the acid mantle of the skin.

Scope of delivery:
Brine nebulization compressor (brine nebulization for steam bath), nebulization nozzle, 5m air hose blue, stainless steel container, without control (eg. use your own switch)

The assembly is simple! In principle, you make yourself a “switched” socket (eg, via a light switch in front of the cabin).
The electrical connection must be carried out by a licensed electrician.

If you want to upgrade the inhalation technology at a later date, this is very easy! These are few steps:

All you need to do is:
1.) Make a 25mm hole in the ceiling (this is where the later nebulizing nozzle will be placed – see picture below).
2) Mount a support part for the brine tank on the wall (not included in the scope of delivery, e.g. a glass pedestal).
4) Connect the fogging unit to the fogging nozzle using the air hose supplied.
5.) Silicone nozzle to the ceiling.

The fogging compressor could be positioned 10m away. The length of the air hose included is 5m. If you need a longer cable, please specify this when ordering!

This is switched ON or OFF either :

• • with radio socket
  • with normal on/off switch in front of the booth (not included)
  • with stainless steel switch and 12V relay IN the cabin (extra charge)

The compressor must be connected by an electrician.