The steam generator SOL-Steam PLUS should not be missing from your desired steam bath technology. There is this electrode steam generator for small steam rooms and larger steam baths.

Whether commercial steam baths or private steam baths and steam showers, with normal heating rod technology or with high-quality electrode technology (electrode steam generator).

A high-end steam device with electrode technology ensures many years of steam bathing pleasure – You can’t say the same for steam generators from China.

“But you can get from us not only the steam bath technology – you can also purchase the complete steam cabin (SPA modules , or even with assembly of the complete cabin). We are steam bath producer for many years and have been producing exclusively steam baths in any desired shape”.

The SOL-Steam PLUS electrode steam generator is a development from many years of experience in the field of electronic control technology: user-friendliness, control precision, reliable electronics, highly developed, complete control software and high performance.
The wide range of SOL-Steam immersed electrode humidifiers includes models from 1.5 to 130 kg/h capacity.

All models are not in the store here but are available from us – please contact us for larger steam outputs.

1.Install a manual valve (for interrupting the feed water supply) above the unit.
Connect the steam generator to the feed water line. In the SOL-Steam PLUS-05 SOL-Steam PLUS-18 models, use a hose with 3/4″ G connections (see also the operating instructions for the unit).
3.install a mechanical filter to retain any solid impurities (to be installed below the faucet).
4.Connect an electrically non-conductive blowdown connector (heat resistant up to 100 °C (212 °F) and with 40 mm (1.6 inch) minimum inside diameter).
5.insert a funnel for the interruption of the blowdown line.
6.Connect a siphon to prevent odors (40 mm (1.6 inch) minimum inside diameter).

Commissioning video sensor configuration: