Steam bath technology

Technical area steam bath

Posted on by Soleum
Technical area steam bath soleum steam bath technology
16
Jun

Dampfbadtechnik – Technikbereich beim Dampfbad

Die Dampfbadtechnik sollte so nah wie möglich beim Dampfbad montiert werden. Lange Dampfleitungen verursachen ein Kondensieren des Dampfes in der Leitung und somit eine schlechtere Dampfbildung.

Position of the steam bath technology opposite above the toilet

In this picture, the steam bath is located on the left. This is always a best case scenario. The customer has still made compartments here for utensils such as toilet paper and scented emulsions.

Wall cabinet steam bath technology

Behind the steam generator is the steam shower. This is also a possibility to install the technology in the adjacent room. The steam line goes down directly into the cabin. Above the steam generator sits the technology box.

 

Technical connections of the steam generator

Technical data for a 7.5 kW steam unit (SOL STEAM FLEXLINE FLE-10)

Steam capacity [kg/h]: 10 kg
400V / 3Ph / N / 50-60Hz
Electrical power [kW]: 7,5
Fuse protection [A]:   3x 16
Current consumption [A] : 10.8
Steam hose connection [mm]: 40
Max. Filling quantity [ l ]: 5
Empty weight [kg]: 16
Operating weight [kg]: 21
Unit size WxHxD [mm]: 460 x 535 x 320
(External dimensions of width and depth.
Height including drain socket. )
Water connection: tap water of different qualities, 1-10 bar, for 3/4″ male thread
Waste water connection: spigot Ø 1 1/4″

Steam connection: diameter 40mm (you need a rubber-insulated, e.g. AMAFLEX, stainless steel or copper pipe)
Connection lines (water inlet, water outlet and steam line) as well as the steam nozzle (as there are different ones) are not included and have to be made on site.
 

Technical data for an 11.25 kW steam unit (SOL STEAM FLEXLINE FLE-15)

Steam capacity [kg/h]: 15 kg
400V / 3Ph / N / 50-60Hz
Electrical power [kW]: 11,25
Fuse protection [A]:   3x 20
Current consumption [A] : 16.2
Steam hose connection [mm]: 40
Max. Filling quantity [ l ]: 13
Empty weight [kg]: 22
Operating weight [kg]: 36
Unit size WxHxD [mm]: 540 x 695 x 320
(External dimensions of width and depth.
Height including drain socket. )
Water connection: tap water of different qualities, 1-10 bar, for 3/4″ male thread
Waste water connection: spigot Ø 1 1/4″

Steam connection: diameter 40mm (you need a rubber-insulated, e.g. AMAFLEX, stainless steel or copper pipe)
Connection lines (water inlet, water outlet and steam line) as well as the steam nozzle (as there are different ones) are not included and have to be made on site.
 
Soleum

Leave a Reply