Technical area steam bath

Steam bath technology should be mounted as close as possible to the steam bath.

Long steam lines cause the steam to condense in the line, resulting in poorer steam formation.

In the picture you can see a common selection:

high quality steam generator
Fragrance pump
Brine atomization technique (sea climate in the steam room)
Technique box from SOLEUM

Scheme steam bath technology and accessories

Steam generator (customer’s choice)
Technical box SOLEUM (connection for heating mats, lights, switches,..)
Steam hose (DN25/DN40 – depending on steam generator)
Copper line (25mm or 42mm – depending on steam generator) with Amaflex insulation
Water inlet 3/4″ male thread
Waste water connection diameter= 1 1/4″
Fragrance pump
T-piece in the steam line (for inserting the fragrance)
Container with fragrance for steam baths (mixing ratio according to customer’s choice)
Steam nozzle = facing as per order (depending on steam line)
oil-free air compressor for salt water atomization (brine fogging)
Nozzle for salt water atomization (brine fogging) INSIDE the booth

Component definition steam generator (inside)

Steam outlet
Steam hose adapter
Electrodes plug
Electrodes hand nut
Steam cylinder
Electrodes
Manual drain hose
Support foot
Solenoid valve
Water connection
Display
Control switch
Main contactor
Control electronics (configurable)
Current transformer
Automatic circuit breaker
Blowdown pump
Cable bushings
Sewage connection

GraPHIC diagram of the steam bath technology

technical data , example 10kg and 15kg

Technical connections of the steam generator

Technical data for a 7.5 kW steam unit(SOL STEAM FLEX FLE-10)

Steam capacity [kg/h]: 10 kg

400V / 3Ph / N / 50-60Hz

Electrical power [kW]: 7,5

Fuse protection [A]: 3 x 16

Current consumption [A] : 10.8

Steam hose connection [mm]: 40

Max. Filling quantity [ l ]: 5

Empty weight [kg]: 16

Operating weight [kg]: 21

Unit size WxHxD [mm]: 460 x 535 x 320

(External dimensions of width and depth.

Height including drain socket. )

Water connection: tap water of different qualities, 1-10 bar, for 3/4″ male thread

Waste water connection: spigot Ø 1 1/4″

Steam connection: diameter 40mm(you need a rubber insulated, e.g. AMAFLEX, stainless steel or copper pipe)

Connection lines (water inlet, water outlet and steam line) as well as the steam nozzle (as there are different ones) are not included and have to be made on site.

Technical data for an 11.25 kW steam unit (SOL STEAM FLEX FLE-15)

Steam capacity [kg/h]: 15 kg

400V / 3Ph / N / 50-60Hz

Electrical power [kW]: 11,25

Fuse protection [A]: 3 x 20

Current consumption [A] : 16.2

Steam hose connection [mm]: 40

Max. Filling quantity [ l ]: 13

Empty weight [kg]: 22

Operating weight [kg]: 36

Unit size WxHxD [mm]: 540 x 695 x 320

(External dimensions of width and depth.

Height including drain socket. )

Water connection: tap water of different qualities, 1-10 bar, for 3/4″ male thread

Waste water connection: spigot Ø 1 1/4″

Steam connection: diameter 40mm (you need a rubber-insulated, e.g. AMAFLEX, stainless steel or copper pipe)

Connection lines (water inlet, water outlet and steam line) as well as the steam nozzle (as there are different ones) are not included and have to be made on site.

commercial steam generators for steam baths

Select your suitable power of the steam generator

We will be glad to advise you on the steam generator accessories (drain hose, steam hose, steam pipe,..) – Please send us the questions (your project) by EMAIL.